Hook up ice maker pvc pipe, how to install a water line for a refrigerator

Terry Love Plumbing & Remodel DIY & Professional Forum

Plastic tubing is less expensive and easier to install than copper. Before installing the plastic tubing into the refrigerator fitting, cut the tubing to an appropriate length. Related Questions Can i use a self piercing saddle valve on plastic water line? So I got the valve and it was ill equipped to handle the pressure. Do not forget the ring, who is currently as the compression fitting will not work without it.

Had them in every house I've had. Cut the Plastic Tubing Before installing the plastic tubing into the refrigerator fitting, cut the tubing to an appropriate length. Plus, if you've got air in the lines, that's a whole nother headache, trust me you do not want! Run the new supply tube to the back of the refrigerator. Turn on the water and check for leaks.

Measure the distance carefully, and buy a supply tube with plenty of length for the job. Also, check for leaks where the supply tube connects to the refrigerator before pushing the appliance back into place. Can anyone give me a web link to a product that will fit? Probably not one so you will have to install one. Compression Fitting Most modern refrigerators have a compression fitting built into the unit, so all you need to do is connect the plastic tubing.

EHT Spotlight

To hook up a refrigerator ice maker, you will need to connect a line of plastic or copper tubing to a cold water line to carry water to the refrigerator. Disconnect the Existing Water Line. The tee adapter connects to the water supply shutoff valve. Are you sure you want to delete this answer? Simply slide one into the end of the plastic tubing.

If you are handy and have done any plumbing, what does it mean you can do it yourself. Slide the threaded compression nut and compression ring onto the plastic tubing. Don't forget to check everything for leaks! They just say that so you won't try and do-it-yourself. Sometimes you need to file the edges.

Home Questions Tags Users Unanswered. We purchased a vented hood range and needed a ventless range hood. Of course, you will have to turn off the water supply before you disconnect the lines.

11. Supply Boxes

If you don't have a convenient water supply pipe and valve near the refrigerator, you must instead find another spot to hook up the water line. We just bought a new whirlpool fridge and to hook up the ice maker it specifically says not to use a self-piercing saddle valve. Usually, this will be at some other existing water hookup point, like the water supply lines connected to your sink faucet or dishwasher.

Be sure there are no burrs on the copper tubing after you cut it. In most cases, the water line can be run from a kitchen faucet water supply line through the kitchen cabinets and over to the refrigerator. Shorten one of the pipes to allow the insertion of the tee, nipple, and union. Your fridge is probably in the kitchen so look under the sink to see the type and size of the water pipe where the cold water sink supply line is attached.

Ice maker hook-up kit without self-piercing saddle valve

Turn the water supply valve on and check for leaks. What is the best way to attach a ice maker supply line to galvanized pipe. Does anyone know where to find a kit that isn't self-piercing or how to get around using the self-piercing valve? Now turn on the faucet shutoff valve under the sink and check for leaks at the Adapt-a-Tee connections. There will be plastic inserts in the ice maker kit.

Fittings Needed to Connect an Ice Maker to Plastic Tubing

Report Abuse

Here is a link to such a valve. Flex water supply tubes are available in either a tough plastic nylon mesh or braided steel. How do you repair a steel supporting beam in a block of flats that has substantial rust?

How to Install a Water Line for a Refrigerator

As the nut is tightened, dating speed the ferrule is compressed between the coupling and the pipe. You can rent or borrow a pipe cutter and a couple of pipe wrenches. Renpen seems to be on right track. You essentially do the same thing with copper except you don't need a union or have to thread anything. Connect the Supply Tube to the Refrigerator.

Home Guides

What size is an ice maker connection? If the refrigerator has a water dispenser, flush out several gallons to purge the line of all the air. They come in various sizes to suit whatever situation you have. Inside the ice maker kit will be a compression nut and ring.

How to Install a Water Line for a Refrigerator

  • My clothes dryer was working fine, then all the sudden I heard a loud bang and the drum stopped moving.
  • The hard part is installing tee.
  • Adapt-A-Tees are easy to install, and they provide the extra line you need with the least amount of work.
  • Email Required, but never shown.
How to Install an Ice-Maker Line to a PVC Pipe

If running the line through the cabinets is not feasible, you might need to run a line through the floor and up to where the refrigerator is located. Plastic is best for taste but have seen mice chew and cause leaks. When you finish the job and slide the refrigerator back into place, the tubing roll will press against the wall, using almost no space. The seal on the supply hose side is made by a rubber washer which is usually built-in the the nut of the supply hose.

Can anyone recommend what we can do to transform this unit to ventless? Your issue is that you are trying to mix two different threaded standards. Although the braided steel is considerably more expensive, the extra strength it provides is well worth the investment. Weird Air Conditioner smell?

The beauty of plastic tubing is that it is flexible. Tighten the connection just slightly more than hand-tight, using pliers. Tighten the fittings as needed, using channel-type pliers or an adjustable wrench. After performing a straight cut, simply roll up the tubing. Moreover, the time and effort to do this would hardly offset the relatively simply cutting and threading a couple of pipe ends and buying standard plumbing fittings.

Plastic Insert There will be plastic inserts in the ice maker kit. Compression Nut and Ring Inside the ice maker kit will be a compression nut and ring. Water line roughed in - ice maker in fridge. You could put your valve on the copper pipe side.

  1. If there are no fixure shutoff valves, you can turn off the water by closing the main water supply valve to the entire house.
  2. There are times and situtations you can be creative, but this isn't one of them.
  3. Where can I find information about water pipe sizes, there must be some standard?
  4. The ice maker line to my refrigerator currently has no shutoff valve and I'd like to add one but I can't figure out what size the connector is.

Connect an Ice Maker to Your House with Leak-Free Fittings

Go to Home Depot or Lowes and tell them you want to put a tee with a cut-off on the end of the cold water pipe where the supply line connects to the cold water sink faucet. This will mean cutting the pipe, threading both ends, installing a union with a nipple. First, locate the shutoff valve under the kitchen sink where you want to connect the new water line. It has to be in galvanized pipe I am fairly experienced, and have no problem sweating copper etc, however, I've never run into galvanized pipe. The seal is made by either a ferrule or a rubber washer.

How to Install an Ice-Maker Line to a PVC Pipe

If there is no slack in the line, you will have to cutt out a section to accomodate the tee, union, and nipple. Do you have the paperwork that came with the fridge? Tighten Compression Nut Insert the tubing into the compression fitting, making sure the tubing goes all the way in. Adapt-a-Tees can be used in many situations where you need an extra line. The other side of the fitting is a compression fitting, which you will use to connect the plastic tubing to the refrigerator.

Ice maker to pvc pipe

The compression coupling would have come with two nuts, one of which has been discarded as the supply hose has one built-in. You can do all of this yourself too! If your refrigerator does not have a compression fitting, install the fitting that comes with the ice maker kit. Please don't use one of those piericing valves either!

Water not running into my washer at all? Insert the tubing into the compression fitting, dating making sure the tubing goes all the way in. You need to use a tee a cold water line with a valve. How can i self-pierce my ears without a kit or a piercing needle? The fridge can't be that far away from the sink.

  • Sugar mama dating free
  • Online dating for recovering addicts
  • Michael scott dating site
  • Adventist dating canada
  • Should i hook up with a girl that has a boyfriend
  • Totally free indian dating sites
  • Online gamer dating